LB-201 Water-based Dry Laminating Adhesive
I. Features of LB-201
1. The product is a kind of new-type adhesives with better comprehensive performances, which integrates advantages of water-based adhesive&oil-based adhesive,&is applicable to various bridge laminating machines. Generally speaking, all-dry laminating is adopted.
2. Direct laminating&cutting of various printed matters can avoid the defects of paper deforming&expansion&contraction due to water-based laminating.
3. It is a kind of safe, non-hazardous&no-irritation environment-friendly products.
4. Thanks to large solid content, the product can manage powder spraying over the printing surface to improve the evenness of the printing surface.
II. Technical Parameters of LB-201
Main Components |
Ph Value |
Viscosity mpa.s |
Appearance |
Service Life |
Complete Solidification |
Acrylic Resin |
7+/0.5 |
80-1000 |
White Emulsion |
6 months |
24 hours |
III. Application Method of LB-201
1、Before application, raise the temperature of roller of the laminating machine to 80-95℃,&the temperature of the drying groove to 50-90℃.
2、Pour the laminating adhesive to the groove, start the gluing roller&mix the adhesive. The quantity of adhesive shall be decided flexibly according to the type of laminated printing.
3、After complete drying of adhesive, the real temperature of the roller shall be 85-95℃&the pressure shall be above 15mpa.
4、Before complete drying of adhesive, the real temperature of the roller shall be 40-60℃,&the pressure shall be controlled to ensure no adhesive overflow from both sides of laminating&connection under pressure.
Notices of LB-201
1、Clean the machine before application;
2、Never mix the product with other adhesives;
3、Clean gluing roller with water after closing;
4、Applied BOPP films shall have qualified corona;
5、Before laminating of gold-and-silver ink printed matters, it is suggested to confirm the color retention&bonding strength of sample;
6、In case of the following conditions|later processing of the composite product, make trial of sample before mass production; (1) gold&silver cardboard; (2) embossing; (3) concavo-convex; (4) papering; (5) thick ink level|printed surface with too much dryer, etc;
Remarks:
1. In case of any inquiries during application, our company provides after-sale service;
Service Hotline: 028-88999695 Complain Hotline: 13350889072
2. The content&data of this instruction are scientific&correct, but does not assume any liabilities of quoter. The final explanation rights belong to our company.
Certification by ISO9001:2000